,ԪᣬԪ,Ԫ,ɱBK,ɱMBM,ʴ,,Һ,Һɱ,AMP-95,Ϻֻѧ޹˾-防锈剂
ҵѶǰλãҳ >> >> ҵѶ
The difference of cutting fluid and emulsified oil
2019-9-6

The cutting fluid is refined from lubricants, cleaning agents, rust inhibitors, bactericides, etc. It has excellent lubrication, cooling, cleaning and rust prevention. It has the effects of reducing tool wear, improving finish and reducing power consumption. The appearance of the cutting fluid is yellow or green transparent after being mixed with water. The oil content is 0%.

Emulsified oil is made of extreme pressure agent, emulsifier, oilliness agent and rust inhibitor. It has excellent lubrication, cooling, cleaning, rust protection and emulsion stability, and its lubricating performance is better than cutting fluid and micro-emulsified cutting fluid. The apprerance of emulsified oil is milky white milk after being mixed with water. The oil content of the emulsified oil is more than 90%.

The microemulsion cutting fluid has the functions of reducing tool wear, improving the smoothness and reducing the power consumption, and has the characteristics of good rust prevention and long service life. The microemulsion cutting fluid exhibits a light white transparent liquid after watering, and the oil content is 10-50%.

    In summary, the cutting fluid and the emulsified oil are different. The cutting fluid is the cutting fluid, and the emulsified oil is the emulsified oil. Although there is no difference in use, the lubricating of emulsified oil is higher than the cutting fluid, and the cooling of cutting fluid is higher than emulsified oil, especially on the grinding machine, it can be distinguished easily.

-Ϻֻѧ޹˾רעڽӹҺعӼӦúͼойϺּΪͻṩԼ۱ȵIJƷͷʹͻIJƷﵽһˮƽھȡƵλ